Language

FOLLOWS:

All Categories

Blog

Home » Blogs » Dimensions of PP Melt Blown Filter Cartridge

Dimensions of PP Melt Blown Filter Cartridge

2022-01-18 Page view : 88 views

PP melt blown filter cartridge is a tubular filter cartridge made of non-toxic and tasteless polypropylene particles through heating, melting, wire spraying, traction and acceptance forming. If the raw material is mainly polypropylene, it can be called PP melt blown filter cartridge. It is not only used in large quantities in water purification. It also has excellent chemical compatibility and is suitable for the filtration of strong acids, bases and organic solvents. It has strong pollution holding capacity, long service life and low cost. Because the melt blown filter cartridge is generally used in the field of liquid filtration, various factors should be comprehensively considered when selecting the material of the melt blown filter cartridge.

 

PP melt blown filter cartridge is made of polypropylene as raw material. After heating melt blown wire, it forms a deep filter cartridge with a certain aperture gradient, which is produced at one time. The outer sparse and inner dense structure can evenly intercept pollutants of different sizes in the inner and outer layers of the filter cartridge. It is often used for liquid pre filtration.

 

Features: strong acid and alkali resistance, high flux, chemical compatibility, multi-layer filtration without any adhesive.

 

Technical indicators:

 

  1. Dimensions:

Outer diameter: 63mm、? 115mm inner diameter: 28mm、? 30mm

Length: 5 “~ 40”, accuracy: 1.0 ~ 100um

End cover: double opening, 2-222 flat tail, 2-222 rocket tail, 2-226 flat tail, 2-226 rocket tail

 

  1. Operating parameters:

PH value: 1 ~ 13

Operating temperature: general type < 60 ℃ (0.03mpa) high temperature type < 90 ℃ (0.02MPa)

Maximum tolerable differential pressure (60 ℃): 0.01Mpa forward / 0.06mpa reverse

 

PP melt blown filter cartridge is made of pure polypropylene by one-time hot spinning. It is suitable for deep filtration of highly clean liquids and is usually used as a safety filter for precision membrane filtration.

 

Product features:

High filtering precision, small differential pressure, large flow and long service life; the filter has large pore diameter and good deep filtration effect; the filter cartridge is made of pure polypropylene, resistant to acid and alkali and no secondary pollution.

 

Main technical performance:

Nominal filtration accuracy: 1 μ m,5 μ m,10 μ m,20 μ m,30 μ m,50 μ m,75 μ m,100 μ m;

Outer diameter of filter: 55 mm, 63 mm, 65 mm; The inner diameter of the filter: 28 mm, 30 mm. The blown molten polypropylene filter can use water, acid and alkali, chemical solution and other non organic solvents, and the service temperature is ≤ 60 ° C.

Filter length: 10 inches, 20 inches, 30 inches, 40 inches; Metric 250 mm, 500 mm, 750 mm, 1000 mm; Non standard sizes can be customized according to customer requirements.

Application fields: electroplating solution, magnetic slurry filtration, various types of precision filtration, pre filtration, fermentation broth filtration, reverse osmosis safety filtration.

Model: outer diameter 70 mm, length 5, 10, 20, 30, 40 inches, five types, filter interface with flat pressure, insert, three pressure shapes.